D-Link DIR-665 User Manual download pdf (Page 66)

62D-Link DIR-665 User Manual

Section 4 - Security

Conﬁgure WPA-Personal (PSK)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish

wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to

the added overhead.

1. Log into the web-based conﬁguration by opening a web browser

and entering the IP address of the router (192.168.0.1). Click

on Setup and then click Wireless Settings on the left side.

2. Next to Security Mode, select WPA-Personal.

3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only.

Use Auto if you have wireless clients using both WPA and

WPA2.

4. Next to Group Key Update Interval, enter the amount of time

before the group key used for broadcast and multicast data

is changed (3600 is default).

5. Next to Pre-Shared Key, enter a key (passphrase). The key

is entered as a pass-phrase in ASCII format at both ends of

the wireless connection. The pass-phrase must be between

8-63 characters.

6. Click Save Settings to save your settings. If you are conﬁguring the router with a wireless adapter, you will lose

connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 102 103

No comments

D-Link DIR-665 User Manual Page 66