D-Link DIR-665 User Manual download pdf (Page 93)

89D-Link DIR-665 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps

below:

Step 1

Windows

7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.

Windows Vista

- Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage

Network Connections.

Windows XP - Click on Start > Control Panel > Network Connections.

Windows 2000 - From the desktop, right-click My Network Places > Properties.

Step 2

Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP address and enter an IP address that is on the same

subnet as your network or the LAN IP address on your router.

Example: If the router´s LAN IP address is 192.168.0.1, make your IP address

192.168.0.X where X is a number between 2 and 99. Make sure that the number

you choose is not in use on the network. Set Default Gateway the same as the LAN

IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The

Secondary DNS is not needed or you may enter a DNS server from your ISP.

Step 5

Click OK twice to save your settings.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 102 103

No comments

D-Link DIR-665 User Manual Page 93