D-Link DIR-857 User Manual download pdf (Page 29)

24D-Link DIR-857 User Manual

Section 3 - Conguration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP (Internet Service Provider.)

Maximum Transmission Unit - you may need to change the MTU for optimal performance

with your specic ISP. 1500 is the default MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on

the Broadband Router. It is not recommended that you change the default MAC address

unless required by your ISP. You can use the Clone Your PC’s MAC Address button to

replace the Internet port’s MAC address with the MAC address of your Ethernet card.

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Static (assigned by ISP)

Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,

gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which

are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 122 123

Comments to this Manuals

No comments

D-Link DIR-857 User Manual Page 29

Comments to this Manuals

Related products and manuals for Routers D-Link DIR-857