D-Link DSL-2740U Installation Guide download pdf (Page 4)

DSL-2740U Quick Installation Guide

CONNECTING TO PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cable between any of four Ethernet ports located on

the back panel of the router and the Ethernet port of your PC.

3. To connect the router to a DSL line: connect a phone cable between the

DSL port of the router and the ADSL OUT port of the splitter. Connect

your phone to the PHONE port of the splitter. Then connect another

phone cable between a phone jack and the ADSL IN port of the splitter.

4. To connect the router to an Ethernet line: connect the Ethernet cable

between any of four Ethernet ports located on the back panel of the router

and the Ethernet line.

5. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

6. Turn on the router by pressing the ON/OFF button on its back panel.

7. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to obtain an IP address automatically (as

DHCP client).

1 2 3 4 5 6 7 8 9 ... 21 22

No comments

D-Link DSL-2740U Installation Guide Page 4