66D-Link DAP-1533 User Manual
Section 4 - Security
Congure WPA/WPA2
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless Settings on the left side.
2. Next to Security Mode section, select Enable WPA Wireless
Security (enhanced) from the drop-down menu.
3. Next to Cipher Type, select TKIP, AES, or Auto (TKIP/AES).
4. Next to PSK/EAP, select either PSK or EAP.
5. Next to Network Key, enter a key. The key is entered as a passphrase
in ASCII format at both ends of the wireless connection. The
passphrase must be between 8-63 characters.
6. Click Save Settings at the top of the window to save your settings.
If you are conguring the access point with a wireless adapter, you
will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the access point.
Comments to this Manuals