D-Link DAP-2310 User Manual download pdf (Page 17)

17D-Link DAP-2310 User Manual

Section 3 - Conguration

Basic Settings

Wireless

Access Point mode

Select Access Point from the drop-down menu.

The other three choices are WDS with AP, WDS,

and Wireless Client.

Service Set Identier (SSID) is the name designated

for a specic wireless local area network (WLAN).

The SSID’s factory default setting is dlink. The SSID

can be easily changed to connect to an existing

wireless network or to establish a new wireless

network. The SSID can be up to 32 characters and

is case-sensitive.

Enable or Disable SSID visibility. Enabling this

feature broadcasts the SSID across the network,

thus making it visible to all network users. This

feature is enabled by default.

Enabling this feature automatically selects

the channel that provides the best wireless

performance. Enable is set by default. The channel selection process only occurs when the AP is booting up.

All devices on the network must share the same channel. To change the channel, rst toggle the Auto Channel Selection setting to

Disable, and then use the drop-down menu to make the desired selection.

Note: The wireless adapters will automatically scan and match the wireless settings.

Mode:

Network Name

(SSID):

SSID Visibility:

Auto Channel

Selection:

Channel:

Wireless Band:

Select 2.4GHz from the drop-down menu.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 84 85

No comments

D-Link DAP-2310 User Manual Page 17