D-Link DAP-2310 User Manual download pdf (Page 46)

46D-Link DAP-2310 User Manual

Section 3 - Conguration

DHCP Server

Dynamic Pool Settings

The DHCP address pool denes the range of the IP address that can be assigned to stations in the network. A Dynamic Pool

allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2310

is capable of acting as a DHCP server.

Dynamic Host Configuration Protocol (DHCP)

assigns dynamic IP addresses to devices on

the network. This protocol simplifies network

management and allows new wireless devices to

receive IP addresses automatically without the need

to manually assign new IP addresses. Select Enable

to allow the DAP-2310 to function as a DHCP server.

Input the rst IP address available for assignment

on your network.

Enter the number of IP addresses available for

assignment. IP addresses are increments of the IP

address specied in the “IP Assigned From” eld.

All devices in the network must have the same

subnet mask to communicate. Enter the submask

for the network here.

Enter the IP address of the gateway on the network.

Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines

the IP address of a network computer that has a dynamically assigned IP address.

Function

Enable/Disable:

IP Assigned

From:

The Range of

Pool (1-254):

Subnet Mask:

Gateway:

WINS:

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 84 85

No comments

D-Link DAP-2310 User Manual Page 46