D-Link DIR-655 Xtreme N User Manual download pdf (Page 33)

33D-Link DIR-655 User Manual

Section 3 - Conﬁguration

Enter a name for the rule. You may select a

pre-dened application from the drop-down

menu and click <<.

This is the port used to trigger the application. It

can be either a single port or a range of ports.

Select the protocol of the trigger port (TCP,

UDP, or Both).

This is the port number on the Internet side that

will be used to access the application. You may

dene a single port or a range of ports. You

can use a comma to add multiple ports or port

ranges.

Select the protocol of the rewall port (TCP,

UDP, or Both).

The schedule of time when the Application Rule

will be enabled. The schedule may be set to

Always, which will allow the particular service

to always be enabled. You can create your own

times in the Tools > Schedules section.

Name:

Trigger:

Trafﬁc Type:

Firewall:

Trafﬁc Type:

Schedule:

Application Rules

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and

others. These applications have difculties working through NAT (Network Address Translation). Special Applications

makes some of these applications work with the DIR-655. If you need to run applications that require multiple connections,

specify the port normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or

UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trafc.

The DIR-655 provides some predened applications in the table on the bottom of the web page. Select the application

you want to use and enable it.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 86 87

No comments

D-Link DIR-655 Xtreme N User Manual Page 33