Troubleshooting (continued)
uninstall the drivers, restart the system, and repeat the driver
installation procedure.
4. The computer with the wireless adapter installed is unable to
connect to the wireless network.
• In Infrastructure mode, make sure the same Service Set Identifier
(SSID) is specified on the settings for the wireless clients and access
points. The SSID factory default setting for the D-Link AirPro
products is Default. (Please refer to Checking the Wireless
Configuration in the Networking Basics section of this manual for
more information.)
• In Ad-Hoc mode, both wireless clients will need to have the same
SSID. Please note that it might be necessary to set up one client to
establish a BSS (Basic Service Set) and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a BSS at the same time, which can result in multiple singular BSSs
being established, rather than a single BSS with multiple clients
associated to it. (Please see the Status Tab in Linkmon in the
Configuration Utilities section or see Checking the Wireless
Configuration in the Networking Basics section of this manual to
learn more about BSS-Basic Service Set.)
• Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting to
an access point and select Ad-Hoc mode when connecting without
an access point. Double-click on the network connection icon in
the taskbar > click on Properties > click on Configure > select the
Settings Tab > click on Modify to change the settings for the
wireless adapter. (Please refer to Checking the Wireless
Configuration in the Networking Basics section of this manual for
more information.)
• Verify that the Turbo Mode setting is exactly the same for wireless
clients and the access point. Please note that the wireless
connection will not be established in Infrastructure or Ad-Hoc mode
if Turbo Mode is enabled on one end of the wireless connection and
not the other. (Please refer to Checking the Wireless
Configuration in the Networking Basics section of this manual for
more information.)
• If Enable Security is selected, make sure that the correct encryption
keys are entered on both the wireless clients and the access points.
(25 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals