D-Link DCS-3410 User Manual download pdf (Page 30)

30D-Link DCS-3410 User Manual

Section 3 - Conﬁguration

LAN Settings:

DHCP:

Static IP Address:

IP Address:

Subnet Mask:

Default Gateway:

Primary DNS:

Secondary DNS:

Enable UPnP:

Enable UPnP port

forwarding:

Settings for your local area network.

Select this connection if you have a DHCP server running

on your network and would like a dynamic IP address to be

updated to your camera automatically.

You may obtain a static or xed IP address and other network

information from your network administrator for your camera.

A static IP address will ease you for accessing your camera

in the future.

The xed IP address.

The default value is “255.255.255.0.” Used to determine if the

destination is in the same subnet.

The gateway used to forward frames to destinations in a

different subnet. Invalid gateway settings may cause the failure

of transmissions to a different subnet.

Primary domain name server that translates names to IP

addresses.

Secondary domain name server to backup the primary one.

Enable this setting to allow your camera to be congured as an

UPnP device in your network.

Enable this setting to allow the camera to add port forwarding entries into the router automatically.

Network Setup

Use this section to configure the network connections for you camera. All relevant information must be entered

accurately.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

No comments

D-Link DCS-3410 User Manual Page 30