D-Link DCS-6915 User Manual download pdf (Page 36)

36D-Link DCS-6915 User Manual

Section 3: Advanced Conguration

Network

LAN

Get IP address automatically (DHCP): The camera’s default setting is . Please refer to User’s

Manual for login with the default IP address. If select , after the IP Camera restarts, users can

search it through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch”

folder in the supplied CD. NOTE: Please make the record of the IP Camera’s MAC address, which

can be found in the label of the camera, for identication in the future.

Note: The camera will switch to static IP after 60 seconds if an IP address is not assigned

Use xed IP address: To setup a static IP address, select and move the cursor to the IP address

eld and insert the new IP address, ex. 192.168.7.123; then go to the Default gateway (explained

later) and change the setting, eg. 192.168.7.254.

IP address: This is necessary for network identication.

Subnet mask: It is used to determine if the destination is in the same subnet. The default

value is “255.255.255.0".

Default gateway: This is the gateway used to forward frames to destinations from a dierent

subnet. An invalid gateway setting will fail to transmit to destinations in a dierent subnet.

Primary DNS: The Primary DNS is the primary domain name server that translates hostnames

into IP addresses.

Secondary DNS: The Secondary DNS is a secondary domain name server that backups the

primary DNS.

IP Settings

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 68 69

No comments

D-Link DCS-6915 User Manual Page 36