D-Link DCS-6915 User Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 69
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
47D-Link DCS-6915 User Manual
Section 3: Advanced Conguration
Event Settings
This section explains how to congure the camera to respond to particular situations (an
event). A typical application is that when a motion is detected, the camera sends buered
images to an FTP server or e-mail address as notications.
Sever Settings
Click Add Server on the Event Settings page to open the Server Setting page. On this page,
you can specify where the notication messages are sent when a trigger is activated. A total
of 5 server settings can be congured.
Server name: Enter a name for the server setting.
Server Type: There are four choices of server types available: E-mail, FTP, HTTP, and
Network storage. Select the item to display the detailed conguration options. You can
congure either one or all of them.
E-mail: Select to send the media les via e-mail when a trigger is activated.
Sender e-mail address: Enter the e-mail address of the sender.
Recipient e-mail address: Enter the e-mail address of the recipient.
Server address: Enter the domain name or IP address of the e-mail server.
User name: Enter the user name of the e-mail account if necessary.
Password: Enter the password of the e-mail account if necessary.
Server port: The default mail server port is set to 25. You can also manually set another
port.
If your SMTP server requires a secure connection (SSL), select This server requires a secure
connection (SSL).
To verify if the e-mail settings are correctly congured, click Test. The result will be shown in
a pop-up window. If successful, you will also receive an e-mail indicating the result.
Click Save to enable the settings, then click Close to exit the page.
FTP: Select to send the media les to an FTP server when a trigger is activated.
Server address: Enter the domain name or IP address of the FTP server.
Server port: By default, the FTP server port is set to 21. It can also be assigned to
another port number between 1025 and 65535.
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 68 69

Comments to this Manuals

No comments