D-link WBR-2310 User Manual download pdf (Page 19)

19D-Link WBR-2310 User Manual

Section 3 - Conﬁguration

Choose Dynamic IP Address to obtain IP Address

information automatically from your ISP. Select

this option if your ISP does not give you any IP

numbers to use. This option is commonly used

for Cable modem services.

The Host Name is optional but may be required by

some ISPs. The default host name is the device

name of the Router and may be changed.

The default MAC Address is set to the WAN’s

physical interface MAC address on the Broadband

Router. It is not recommended that you change

the default MAC address unless required by your

ISP.

The default MAC address is set to the WAN’s

physical interface MAC address on the Broadband

Router. You can use the “Clone MAC Address”

button to copy the MAC address of the Ethernet

Card installed by your ISP and replace the WAN

MAC address with the MAC address of the router.

It is not recommended that you change the default

MAC address unless required by your ISP.

Enter the Primary DNS server IP address assigned by your ISP.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1500 is the

default MTU.

Dynamic IP

Address:

Host Name:

MAC Address:

Internet Setup

Dynamic (Cable)

Clone MAC

Address:

DNS Addresses:

MTU:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 77 78

No comments

D-link WBR-2310 User Manual Page 19