D-link WBR-2310 User Manual download pdf (Page 37)

37D-Link WBR-2310 User Manual

Section 3 - Conﬁguration

Enter a new Login Name for the Administrator

account.

Enter a new password for the Administrator Login

Name. The administrator can make changes to

the settings.

Enter a new Login Name for the User account.

Enter the new password for the User login. If you

but cannot change them.

Remote management allows the WBR-2310

to be conﬁgured from the Internet by a web

browser. A username and password is still

required to access the Web-Management

interface. In general, only a member of your

network can browse the built-in web pages to

perform Administrator tasks. This feature enables

you to perform Administrator tasks from the

remote (Internet) host.

The Internet IP address of the computer that has

access to the Broadband Router. If you input an

asterisk (*) into this ﬁeld, then any computer will

be able to access the Router. Putting an asterisk (*) into this ﬁeld would present a security risk and is not recommended.

The port number used to access the WBR-2310.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the WBR-2310 and 8080 is the port used for the Web

Management interface.

Administrator

Password:

User Login Name:

User Password:

Remote

Management:

IP Address:

Port:

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 77 78

No comments

D-link WBR-2310 User Manual Page 37