D-link WBR-2310 User Manual download pdf (Page 27)

27D-Link WBR-2310 User Manual

Section 3 - Conﬁguration

Check the box to enable the DHCP server on your router.

Uncheck to disable this function.

Enter the starting and ending IP addresses for the DHCP

server’s IP assignment.

The length of time for the IP address lease. Enter the Lease

time in minutes.

Also known as Static DHCP - allows the router to assign

the same IP address information to a speciﬁc computer

on the local network. The speciﬁed computer will get the

same DHCP IP address information every time it is turned

on. No other computer on the local network will receive the

speciﬁed static DHCP address except for the conﬁgured

computer. Static DHCP is very helpful when used for server

computers on the local network that are hosting applications

such as Web and FTP.

Enable DHCP

Server:

DHCP IP Address

Range:

Lease Time:

DHCP

Reservation:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The WBR-2310 has a built-in DHCP server. The DHCP Server will

automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be

DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on,

they will automatically load the proper TCP/IP settings provided by the WBR-2310. The DHCP Server will automatically

allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and

ending address of the IP address pool.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 77 78

No comments

D-link WBR-2310 User Manual Page 27