D-Link DES-1526 Specifications download pdf (Page 51)

public - Allows authorized management stations to retrieve MIB

objects.

private - Allows authorized management stations to retrieve and

modify MIB objects.

Traps

Traps are messages that alert network personnel of events that

occur on the Switch. The events can be as serious as a reboot

(someone accidentally turned OFF the Switch), or less serious

like a port status change. The Switch generates traps and sends

them to the trap recipient (or network manager). Typical traps

include trap messages for Device boot up, Authentication Failure,

Port status change, and Abnormal transmit/receive data packet

error.

MIBs

Management and counter information are stored by the Midspan

in the Management Information Base (MIB). The DES-1526 uses

the standard MIB-II Management Information Base module and

Power over Ethernet MIB (RFC3621). Consequently, values for

MIB objects can be retrieved from any SNMP-based network

management software. In addition, the DES-1526 also supports

its own proprietary enterprise MIB as an extended Management

Information Base. The proprietary MIB may also be retrieved by

specifying the MIB Object Identifier. MIB values can be either

read-only or read-write.

Enabled / Disabled: To enable or disable the SNMP function on

the Switch.

SNMP Community / Trap: To configure the SNMP

Community or SNMP Trap configuration.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 94 95

No comments

D-Link DES-1526 Specifications Page 51