D-Link DES-1526 Specifications download pdf (Page 56)

Abnormal* Transmit Error: A trap when there is a transmit

data error in the twisted pair port.

Abnormal*: 50 error packet count within 10 seconds.

PoE Events: Monitoring the PoE ports status.

PoE Power fail: A trap when the port’s power source fails or

the PD64012 fails.

Power over current: A trap when the PoE port’s power is

over current.

Power short circuit: A trap when the PoE port’s power circuit

was short.

Delete Trap: To delete previously defined SNMP Trap, press

the “Delete Trap” button. The Delete SNMP Trap Delete

configuration window will pop up; check the delete dialog box.

Press “Apply” to delete the selected SNMP Trap setting.

Figure 30. Delete SNMP Trap

Modify Trap: To modify a previously defined SNMP Trap,

click on the ID parameter to enter to the selected SNMP Trap to

configure its community name, IP address, and events. Press

“Apply” to save changes of the SNMP Trap.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 94 95

No comments

D-Link DES-1526 Specifications Page 56