D-Link DWL-A520 Specifications download pdf (Page 11)

1. A Home Internet Network with A Residential Gateway/Router

(continued)

(Requirements: A Residential Gateway/Router connected with an Ethernet

(CAT5) cable to an 802.11a Access Point such as the DWL-5000AP.)

This type of installation requires that you provide a dynamic IP address for

each computer on your network. You will need a DHCP-capable Residential

Gateway/Router for your network.

To complete the installation, please follow these steps:

1. Connect the Router/Gateway (for example, the D-Link DI-704P) to

a Broadband connection, (e.g., a Cable modem such as the D-Link

DCM-200 cable modem or a DSL modem such as the D-Link DSL-

300.)

2. Connect the 802.11a Access Point (DWL-5000AP) to the router.

3. Install the D-Link AirPro DWL-A520 Wireless PCI Adapter into a

desktop computer on your wireless network. (You can also install the

D-Link AirPro DWL-A650 Wireless Cardbus Adapter into a laptop

computer. Please refer to the Quick Install Guide included with each

product.)

4. Check the Device Manager to confirm that the wireless adapter is

installed correctly. Please refer to the Networking Basics section in

this manual entitled: Checking the Installation of the Drivers for

the Wireless Adapter.

5. By default, the wireless adapter is set to obtain a Dynamic IP

Address. If you are having difficulty connecting, check to make sure

that the IP Address of the wireless adapter is within the IP address

range of your network. Please refer to the Networking Basics

section in this manual entitled: Checking The IP Address.

6. Learn to share printers and files. Please refer to the Networking

Basics section in this manual entitled: Adding and Sharing Printers

in Windows XP.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 62 63

No comments

D-Link DWL-A520 Specifications Page 11