D-Link DWL-A520 Specifications download pdf (Page 28)

Troubleshooting (continued)

(Please see Checking the Wireless Configuration in the

Networking Basics section of this manual for more information.)

5. The wireless client cannot access the Internet in the Infrastructure

mode.

• Make sure the wireless client is associated and joined with the

correct Access Point. To check this connection: Right-click on the

Networking Icon in the taskbar> select View Available Wireless

Networks. The Connect to Wireless Network screen will appear.

Please make sure you have selected the correct available network,

as shown in the illustrations below.

• Check that the IP Address assigned to the wireless adapter is within

the same IP Address range as the access point and gateway. (For

example: if one computer has an IP Address of 192.168.0.2, the

other computers should have IP Addresses that are sequential, like

192.168.0.3 and 192.168.0.4. The subnet mask must be the same

for all the computers on the network.) To check the IP Address

assigned to the wireless adapter, double-click on the Network

Connection Icon in the taskbar > select the Support tab and the IP

Address will be displayed. (Please refer to Checking the IP

Address in the Networking Basics section of this manual.)

• If it is necessary to assign a Static IP Address to the wireless

adapter, please refer to the appropriate section in Networking

Basics. If you are entering a DNS Server Address, you must also

enter the Default Gateway Address. (Remember that if you have a

DHCP-capable router, you will not need to assign a Static IP Address.

See Networking Basics: Assigning a Static IP Address.)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 62 63

No comments

D-Link DWL-A520 Specifications Page 28