D-Link DSL-2750E User's Guide download pdf (Page 93)

93DSL-2750B User Guide

Statically Assign an IP Address

Windows®

8 Users

• Press the Windows key and then type IP. Click

Settings on the right side and then click View

Network Connections.

• Right-click on the adapter which represents your

wireless network adapter.

• Highlight Internet Protocol Version 4 (TCP /IPv4)

and click Properties.

• Click Use the following IP address and enter an IP

address that is on the same subnet as your network

or LAN IP address on your router or network.

Example: If the router’s LAN IP address is

192.168.0.1, make your IP address 192.168.0.X

where X is a number between 2 and 99. Make sure

that the number you choose is not in use on the network.

• Set Default Gateway the same as the LAN IP address of your router or gateway.

• Set Primary DNS the same as the LAN IP address of your router or gateway.

• The Secondary DNS is optional (you may enter a DNS server from your ISP).

• Click OK to save your settings.

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow

the steps below:

1 2 ... 88 89 90 91 92 93 94 95

No comments

D-Link DSL-2750E User's Guide Page 93