D-Link AirPremier DAP-2310 User Manual download pdf (Page 16)

16D-Link DAP-2310 User Manual

Section 3 - Conguration

Basic Settings

Wireless

Access Point mode

Select Access Point from the drop-down

menu. The other three choices are WDS with

AP, WDS, and Wireless Client.

Service Set Identifier (SSID) is the name

designated for a specic wireless local area

network (WLAN). The SSID’s factory default

setting is dlink. The SSID can be easily

changed to connect to an existing wireless

network or to establish a new wireless network.

The SSID can be up to 32 characters and is

case-sensitive.

Enable or Disable SSID visibility. Enabling

this feature broadcasts the SSID across the

network, thus making it visible to all network

users.

Enabling this feature automatically selects the

channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs

when the AP is booting up.

All devices on the network must share the same channel. To change the channel, rst toggle the Auto Channel Selection

setting to Disable, and then use the drop-down menu to make the desired selection.

Note: The wireless adapters will automatically scan and match the wireless settings.

Mode:

Network Name

(SSID):

SSID

Visibility:

Auto Channel

Selection:

Channel:

Wireless Band:

Select 2.4GHz from the drop-down menu.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 76 77

No comments

D-Link AirPremier DAP-2310 User Manual Page 16