48D-Link DAP-2310 User Manual
Section 3 - Conguration
Static Pool Setting
The DHCP address pool denes the range of IP addresses that can be assigned to stations on the network. A static
pool allows specic wireless stations to receive a xed IP without time control.
Dynamic Host Configuration Protocol
(DHCP) assigns IP addresses to wireless
devices on the network. This protocol
simplies network management and allows
new wireless devices to receive IP addresses
automatically without the need to manually
assign IP addresses. Select Enable to allow
the DAP-2310 to function as a DHCP server.
Use the Static Pool Settings to assign the
same IP address to a device every time you
start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP
range as the Dynamic Pool. After you have
assigned a static IP address to a device via
its MAC address, click Save; the device will
appear in the Assigned Static Pool at the
bottom of the screen. You can edit or delete
the device in this list.
Enter the MAC address of the device
requesting association here.
Dene the submask of the IP address specied in the “IP Assigned From” eld.
Function Enable/
Disable:
Assigned IP:
Assigned MAC
Address:
Subnet Mask:
Comments to this Manuals