D-Link AirPremier DAP-2310 User Manual download pdf (Page 32)

32D-Link DAP-2310 User Manual

Section 3 - Conguration

The device supports up to four multiple Service Set Identiers. In the Basic > Wireless section, you can set the Primary

SSID. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless

network or to establish a new wireless network.

Check to enable support for multiple SSIDs.

This read-only value is the current band

setting.

You can select up to three multi-SSIDs. With

the Primary SSID, you have a total of four

multi-SSIDs.

Service Set Identier (SSID) is the name

designated for a specic wireless local area

network (WLAN). The SSID’s factory default

setting is dlink. The SSID can be easily

changed to connect to an existing wireless

network or to establish a new wireless

network.

Enable or Disable SSID visibility. Enabling

this feature broadcasts the SSID across the

network, thus making it visible to all network

users.

The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description

of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters,

please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed

description of the O802.1x parameters, please go to page 28.

Enable

Multi-SSID:

Band:

Index:

SSID:

SSID Visibility:

Security:

Multi-SSID

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 76 77

No comments

D-Link AirPremier DAP-2310 User Manual Page 32