D-Link DAP-1360 User Manual download pdf (Page 42)

42D-Link DAP-1360 User Manual

Section 3 - Conguration

WAN Settings

Dynamic IP (DHCP)

WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. Choose Dynamic

IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP

number to use. This option is commonly used for Cable modem services.

Host Name:

MTU Size:

Attain DNS

Automatically:

Set DNS manually:

DNS Server:

Clone MAC Address:

The Host Name is optional but may be required

by some ISPs.

YoumayneedtochangetheMTU(Maximum

Transmission Unit) for optimal performance

with your specic ISP. The default MTU size is

1500.

Select this option if you want the DAP-1360 to

get the DNS (Domain Name System) server IP

address automatically.

Select this option if you want to manually enter

the DNS Server IP address(es). The elds to

enter the Primary and Secondary DNS server

IP addresses will appear after you have selected this option.

Enter the Primary and Secondary DNS server IP address assigned by your ISP.

ThedefaultMACaddressissettotheEthernetMACaddressyourDAP-1360.YoucanclicktheCloneYourPC’sMACAddressbutton

to replace the AP’s MAC address with the MAC address of the PC that you used to register with your ISP. It is not recommended

that you change the default MAC address unless required by your ISP.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 100 101

No comments

D-Link DAP-1360 User Manual Page 42