D-Link DAP-1360 User Manual download pdf (Page 72)

72D-Link DAP-1360 User Manual

Section 4 - Security

Congure WPA/WPA2 Personal

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish

wirelessconnectivitybeforeenablingencryption.Yourwirelesssignalmaydegradewhenenablingencryptionduetothe

added overhead.

1. Log into the web-based conguration by opening a web browser

and entering the IP address of the access point (192.168.0.50). Click

on Setup and then click Wireless Settings on the left side.

2.Next to Security Mode, select Enable WPA Wireless Security,

Enable WPA2 Wireless Security,orEnable WPA2-Auto Wireless

Security.

3.NexttoCipher Type,selectTKIP,AES,orAuto.

4.NexttoPSK / EAP,selectPersonal.

5.NexttoPassphrase,enterakey.ThekeyisenteredasapassphraseinASCIIformatatbothendsofthewirelessconnection.

The passphrase must be between 8-63 characters.

6. Click SaveSettings at the top of the window to save your settings. If you are conguring the access point with a wireless

adapter,youwillloseconnectivityuntilyouenableWPA-PSKonyouradapterandenterthesamepassphraseasyoudidon

the access point.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 100 101

No comments

D-Link DAP-1360 User Manual Page 72