D-Link DIR-320 Installation Guide download pdf (Page 5)

DIR-320 Quick Installation Guide

CONNECTING TO PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cable between any of LAN ports located on the back

panel of the router and the Ethernet port of your PC.

3. To connect via a WiMAX, 3G GSM or CDMA network: connect your

USB modem to the USB port

located on the left side panel of the router.

If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

4. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

5. Turn on the router by pressing the ON/OFF button on its back panel.

6. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to obtain an IP address automatically (as

DHCP client).

3 It is recommended to use a USB extension cable to connect a USB modem to the

router.

1 2 3 4 5 6 7 8 9 10 ... 34 35

No comments

D-Link DIR-320 Installation Guide Page 5