D-Link DIR-655 User Manual download pdf (Page 35)

31D-Link DIR-655 User Manual

Section 3 - Conguration

Congure WPA-Personal (PSK)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before

enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

1. Log into the web-based conguration by opening a web browser and entering

the IP address of the router (192.168.0.1). Click on Setup and then click Wireless

Settings on the left side.

2. Click on Manual Wireless Connection Setup.

3. Next to Security Mode, select WPA-Personal.

4. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have

wireless clients using both WPA and WPA2.

5. Next to Group Key Update Interval, enter the amount of time before the group key

used for broadcast and multicast data is changed (3600 is default).

6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-

phrase in ASCII format at both ends of the wireless connection. The pass-phrase

must be between 8-63 characters.

7. Click Save Settings to save your settings. If you are conguring the router with

a wireless adapter, you will lose connectivity until you enable WPA-PSK on your

adapter and enter the same passphrase as you did on the router.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 133 134

No comments

D-Link DIR-655 User Manual Page 35