D-Link DIR-810L User Manual download pdf (Page 34)

30D-Link DIR-810L User Manual

Section 3 - Conguration

Select Static IP to manually enter the IP settings supplied

by your ISP.

Check the box to enable Advanced DNS Service.

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP

Maximum Transmission Unit - you may need to change

the MTU for optimal performance with your specic ISP.

1500 is the default MTU.

The default MAC Address is set to the Internet port’s

physical interface MAC address on the Broadband Router.

It is not recommended that you change the default MAC

address unless required by your ISP. You can use the Copy

Your PC’s MAC Address button to replace the Internet

port’s MAC address with the MAC address of your Ethernet

card.

My Internet

Connection:

Advanced DNS

Service:

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Manual Internet Setup

Static (assigned by ISP)

Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP

address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds

must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address

if it is not in this format.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 147 148

No comments

D-Link DIR-810L User Manual Page 34