D-Link DIR-810L User Manual download pdf (Page 37)

33D-Link DIR-810L User Manual

Section 3 - Conguration

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username

and password. This option is typically used for DSL services.

My Internet Connection: Select PPTP (Username/Password) from the drop-

down menu.

Advanced DNS Service: Check the box to enable Advanced DNS Service.

Address Mode: Here the user can specify whether this Internet

connection requires the use of a Dynamic or Static

IP address. PPTP usually requires a Dynamic IP

conguration.

PPTP IP Address: Enter the PPTP IP address used here. This option is

only available if Static IP is selected.

PPTP Subnet Mask: Enter the PPTP Subnet Mask used here.

PPTP Gateway IP Address: Enter the PPTP Gateway IP address used here.

PPTP Server IP Address: Enter the PPTP Server IP address used here. This is

normally the same a the PPTP Gateway IP address.

Username: Enter the PPTP username used here.

Password: Enter the PPTP password used here.

Verify Password: Re-enter the PPTP password used here.

Reconnect Mode: Use the radio buttons to specify the reconnect mode.

The user can specify a custom schedule or specify the On

Demand, or Manual option. To specify a custom schedule,

use the drop-down menu to select one of the schedules

that has been dened in the Schedules page. To create a

new schedule, click the New Schedule button to open the

Schedules page. Schedules will be discussed later.

Maximum Idle Time: Enter a maximum idle time during which the Internet

connection is maintained during inactivity. To disable

this feature, enable Auto-reconnect.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 147 148

No comments

D-Link DIR-810L User Manual Page 37