D-Link DCS-1000 User's Guide download pdf (Page 16)

The default settings are as follows:

• Default IP – 192.168.0.20

• Subnet Mask – 255.255.255.0

• Default Gateway – 0.0.0.0

Assign Automatically Using

If your network is using RARP, BOOTP or DHCP server you can click

“Assign Automatically Using” and click on “RARP”, “BOOTP” or

“DHCP”. Under this setting DCS-1000 will automatically assign an IP

address from RARP, BOOTP or DHCP server. Each time the DCS-1000

starts up be sure the RARP, BOOTP or DHCP server is setup as assign a static

IP to your DCS-1000.

If your application requires direct connection from an ADSL modem through

DCS-1000’s RJ-45 LAN port and you also have an ISP PPPoE account. Click

on “PPPoE” option and enter the Service Name, User ID and Password into

the respective fields.

DCS-1000 will get an IP address from the ISP each time DCS-1000 starts up.

DNS IP Address:

DNS (Domain Name System) server is an Internet service that translates

domain names (ie. www.dlink.com) into IP addresses (ie. 192.168.0.20). The

DNS IP address can be received from your ISP. Enter at least one DNS IP

Address

LED Control:

The LED control allows user to setup the LED illumination as desired. This

feature provides the flexibility when surveillance activity is ON.

There are three options as follows:

l Normal –

Power - Steady On of the LED indicator.

LAN - Steady On of the LED indicator. When LAN activity

is present the LED indicator will flash steadily.

l OFF –

Power - LED indicator is off

LAN – LED indicator is off

l Dummy –

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 82 83

No comments

D-Link DCS-1000 User's Guide Page 16