D-Link DCS-2332L User Manual download pdf (Page 34)

34D-Link DCS-2332L User Manual

Section 3: Conguration

Enable UPnP Presentation:

Enable UPnP Port Forwarding:

Enable PPPoE:

User Name / Password:

HTTP Port:

Access Name for Stream 1~3:

HTTPS Port:

Authentication:

RTSP Port:

Access name for stream 1 ~ 3:

Enabling this setting allows your camera to be congured

as a UPnP device on your network.

Enabling this setting allows the camera to add port

forwarding entries into the router automatically on a

UPnP capable network.

Enable this setting if your network uses PPPoE.

Enter the username and password for your PPPoE account.

Re-enter your password in the Conrm Password eld.

You may obtain this information from your ISP.

The default port number is 80.

The default name is video#.mjpg, where # is the number

of the stream.

You may use a PC with a secure browser to connect to

the HTTPS port of the camera. The default port number

is 443.

Depending on your network security requirements, the Network Camera provides three types of security

settings for streaming via RTSP protocol: disable and digest. If digest authentication is selected, user

credentials are encrypted using MD5 algorithm, thus providing better protection against unauthorized

access.

The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The

default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be

accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera.

This Network Camera supports multiple streams simultaneously. The access name is used to dierentiate the

streaming source (video prole).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

No comments

D-Link DCS-2332L User Manual Page 34