D-Link DVS-301 User Manual download pdf (Page 23)

Building Networks for People

DVS-301 User Manual v1.00

Cable connection

Shut down the peripheral devices prior to connection. Connect the supplied cables from Video Server to

the related devices according to following steps. Note that power adaptor must be kept unplugged until

other cables are firmly connected. For the first access to Video Server without Ethernet, administrators

may use the included null modem cable to connect to COM for direct connection. It is also convenient for

administrators to access Video Server through the null modem cable directly without modem or Ethernet

card. After necessary information is entered, a modem can be used to dial into the Internet.

Power on

Make sure all cables are correctly and firmly connected. Turn on cameras, sensors, alarm

devices, and then finally attach power adaptor of Video Server to the electric power outlet*.

Since most automatic detections of hardware perform when the system starts, Video Server

should be turned on after all peripherals are turned on and ready.

Connect the power jack of the power adapter to Video Server prior to plugging the utility

end into a utility power outlet. It will reduce accidental electric surge shock.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

No comments

D-Link DVS-301 User Manual Page 23