D-Link DCS-930L User Manual download pdf (Page 19)

19D-Link DCS-930 User Manual

Section 3 - Conﬁguration

Setup > Wireless

Service Set Identier, an identier for your wireless network.

The default setting is channel 6. Select the same channel that is using by other wireless devices within your network. When

there is interference from the wireless networks that overlap with one another, you may change the channel to obtain maximum

performance for your connection.

Infrastructure is a wireless connection using an access point as a transmission point of all wireless devices. Ad-Hoc is a

wireless connection used without an access point, where your DCS-930 is directly connecting to your PC. This is done using

the on-board wireless adapter on the DCS-930 connected to a wireless adapter on the PC.

This page will allow you to select a wireless network that the DCS-930 was able to detect.

For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK. Select the same encryption method that is being

used by your wireless device/ router.

An appropriate Preshared Key, which is needed in order to connect to the wireless network..

SSID:

Channel:

Connection Mode:

Site Survey:

Wireless Security

Mode:

WPA-PSK /

WPA2PSK

Settings:

Wireless Interface

This section allows you to setup and congure the wireless settings

on your camera.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 56 57

No comments

D-Link DCS-930L User Manual Page 19