D-Link 1226G - DES Switch Specifications download pdf (Page 15)

Figure 13. VLAN Group Settings

Once you want to modify the VLAN Group, check on the ID parameter; the ID VLAN configuration window will appear.

Figure 14. VLAN Settings

Trunk Setting

The Trunk function enables you to cascade two devices with a double times bandwidth (up to 4000Mbps in full-duplex mode).

There are two trunking groups for selection; you can select either or both groups for trunking.

Figure 15. Trunk Settings

Be sure that the selected trunk setting port must connect to the device with a same VLAN group.

Mirror Setting

Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and/or outgoing packet from one port of a network

switch to another port where the packet can be studied. It enables the manager to keep close track of switch performance and alter it if necessary.

Configuring the port mirroring by assigning a source port from which to copy all packets and a sniffer port where those packets will be sent.

The selection of the sniffer mode is as follows:

TX (transmit) mode: This mode will duplicate the data transmitted from the source port and forward it to the sniffer port.

RX (receive) mode: This mode will duplicate the data sent to the source and forward it to the sniffer port.

Both (transmit and receive) mode: This mode will duplicate both data transmitted from and data sent to the source port, then it will forward it to the

sniffer port.

Figure 16

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Comments to this Manuals

No comments

D-Link 1226G - DES Switch Specifications Page 15

Comments to this Manuals

Related products and manuals for Network switches D-Link 1226G - DES Switch

Verwandte Produkte und Handbücher für LCD-Fernseher LG 55SK7900PLA