D-Link 1226G - DES Switch Specifications download pdf (Page 17)

System Setting

The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask, and Gateway. Through the Web

Management Utility, you can easily recognize the device by using the System Name and the Location Name.

The Login Timeout is to set the idle time-out for security issues. When there is no action when running the Web Smart Utility, and it times out, you

must re-login to Web Smart Utility before you set the Utility.

Fill up the IP Address, Subnet Mask, and Gateway for the device.

Figure 20.

Trap Setting

The Trap Setting enables the device to monitor the Trap through the Web Management Utility and set the Trap IP Address of the manager where the

trap is to be sent.

Figure 21. Trap Setting

 System Events: Monitoring the system’s trap.

Device Bootup: A trap when booting up the system.

Illegal Login: A trap when an incorrect password is used to login. It will record the IP address that attempted to login.

 Fiber Port Events: Monitors the Fiber port status.

Link Up/Link Down: A trap displaying a change in link status in the fiber port.

Set Password

Password is the invaluable tool used to secure Web Management Switch. Use this function to change the password.

If you forget the password, press the “Reset” button in the rear panel of the Switch. The current settings, including VLAN, Port Setting… etc., will be

lost and the Switch will restore to the default setting.

Figure 22. Set Password

Backup Setting

The backup tools help you to backup the current settings of the Switch. To backup your settings, press the “Backup” button.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Comments to this Manuals

No comments

D-Link 1226G - DES Switch Specifications Page 17

Comments to this Manuals

Related products and manuals for Network switches D-Link 1226G - DES Switch