D-Link 1226G - DES Switch Specifications download pdf (Page 18)

To restore a current settings file to the device, you must specify the backup file and click on the “Restore” button to process the setting of the

recorded file.

Figure 23. Backup Setting

Note: when restoring a recorded file, the current password will not be erased.

Reset Setting

The Factory Reset button helps you to reset the device back to the default settings from the factory. Be aware that the entire configuration will be

reset; the IP address of the device will be set to default setting of 192.168.0.1.

Figure 24. Reset Setting

Logout

When pressing the “Logout” button, you will be logged out and the Web configuration will return to the first Login page.

Figure 25. Logout

5. Technical Specifications

General

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100 BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet

Protocol CSMA/CD

Data Transfer

Rate

Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)

Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-

duplex)

Gigabit Ethernet: 2000Mbps (full-duplex)

Network

Cables

10BASET: 2-pair UTP/STP Cat. 3,4,5; up to 100m

100BASE-TX: 2-pair UTP/STP Cat. 5; up to 100m

1000BASE-T: 4-pair UTP/STP Cat. 5; up to 100m (Cat. 5E

is recommended)

Fiber module: SFP(Mini-GBIC Fiber module

Number of

Ports

24 ×10/100BASE-TX Auto-MDIX STP ports

2 × 1000BASE-T Auto-MDIX STP ports

2 × SFP(Mini GBIC) fiber slot

Physical and Environmental

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

No comments

D-Link 1226G - DES Switch Specifications Page 18