D-Link DCS-3410 User Manual download pdf (Page 27)

27D-Link DCS-3410 User Manual

Section 3 - Conﬁguration

LAN Settings:

DHCP:

Static IP Address:

IP Address:

Subnet Mask:

Default Gateway:

Primary DNS:

Secondary DNS:

Enable UPnP:

Enable UPnP port

forwarding:

Enable PPPoE:

Settings for your local area network.

Select this connection if you have a DHCP server running on your

network and would like a dynamic IP address to be updated to your

camera automatically.

You may obtain a static or ﬁxed IP address and other network

information from your network administrator for your camera. A static

IP address will ease you for accessing your camera in the future.

The ﬁxed IP address.

The default value is “255.255.255.0.” Used to determine if the

destination is in the same subnet.

The gateway used to forward frames to destinations in a different

subnet. Invalid gateway settings may cause the failure of transmissions

to a different subnet.

Primary domain name server that translates names to IP

addresses.

Secondary domain name server to backup the primary one.

Enable this setting to allow your camera to be conﬁgured as an UPnP

device in your network.

Enable this setting to allow the camera to add port forwarding entries into the router automatically.

Enable this setting if you network is using PPPoE service.

Network Setup

Use this section to conﬁgure the network connections for you camera. All relevant information must be entered accurately.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 66 67

No comments

D-Link DCS-3410 User Manual Page 27