D-Link DCS-3410 User Manual download pdf (Page 37)

37D-Link DCS-3410 User Manual

Section 3 - Conﬁguration

RS-485

Support PAN-TILT:

Protocol:

ID:

Baud Rate:

Data Bit:

Stop Bit:

Parity Bit:

When enabling Support PAN-TILT, a control panel will be

displayed on the Live Video page allowing control through

RS-485 for an external camera enclosure.

Select one protocol type from the pull-down menu.

Range from 1 to 255, is the identiﬁer for each RS-485

devices.

Range from 2400 to 38400 bps. It is a speed measurement

for communication between a transmitter and receiver,

indicates the number of bit transfers per second. Higher

baud rate will reduce the distance of the two devices

(transmitter and receiver). By default, the value is 2400.

Either 7 or 8. It is a measurement of the actual data bits

in a transmission. By default, the value is 8.

Either 1 or 2. It is used to signal the end of communication

for a single packet. The more bits used for stop bits, the

greater the lenience in synchronizing the different clocks but the slower the data transmission rate. Bye default, the value is 1.

Choices of No, Even, and Odd. It is a simple form of error checking used in serial communication and you may use no parity. For even and

odd parity, the serial port sets the parity bit (the last bit after the data bits) to a value to ensure that the transmission has an even or odd

number of logic-high bits.

For example, if the data is 011, for even parity, the parity bit is 0 to keep the number of logic-high bits even. If the parity is odd, the parity

bit is 1, resulting in 3 logic-high bits.

You may conﬁgure the RS-485 settings or communication speciﬁcations (baud rate, data bit, stop bit, and parity bit) for your camera.

RS-485 is a serial communication method for computers and devices. For your camera, RS-485 is used to control a PAN/TILT device,

such as an external camera enclosure to perform PAN and TILT movement.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 66 67

No comments

D-Link DCS-3410 User Manual Page 37