D-Link DCS-3410 User Manual download pdf (Page 56)

56D-Link DCS-3410 User Manual

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1

Windows

XP - Click on Start > Control Panel > Network Connections.

Windows

2000 - From the desktop, right-click My Network Places > Properties.

Step 2

Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on

your router.

Example: If the camera´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X

where X is a number between 2 and 99. Make sure that the number you choose is not in

use on the network. Set Default Gateway the same as the LAN IP address of your router

(192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary

DNS is not needed or you may enter a DNS server from your ISP.

Step 5

Click OK twice to save your settings.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 66 67

No comments

D-Link DCS-3410 User Manual Page 56