D-Link DES-7100 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 111
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
DES-7000/DES-7100 Layer 2 Switch Users Guide
Network Cabling and Connections
29
Connect to the DES-7010 Ethernet over VDSL Module
The network connections to the DES-7010 Ethernet over VDSL module are provided using Telco 50
cabling to connect to two male RJ-21 ports at the front panel of the module. These ports are labeled
PSTN and VDSL. These connections are defined as follows:
§ PSTN Use a female RJ-21 connector and Telco 50 cabling to connect the system to a
PBX system or other appropriate connection to the Public Switched Telephone Network.
This provides the uplink to the VDSL service from the telephone or networks services
provider.
§ VDSL Use a female RJ-21 connector and Telco 50 cabling to connect up to 24 VDSL
subscriber ports (i.e. connect to one remote CPE unit per port) to the module. The
switch/module to end users connection can be done through a variety means depending on
the circumstances including using a Main Distribution Frame, Cabling Cabinet, patch panels
or other suitable wiring systems. This provides the combined data and voice channels to the
VDSL accounts.
The per port LED Link indicators on the DES-7010 will:
§ Light green when a link has been established
§ Remain dark when there is no link
Cable Lengths
Use this table to determine the maximum allowable distance for each cable media type.
Standard Media Type
MHz/km
Rating
Maximum
Distance
100BASE-FX
50/125µm Multimode Fiber
(half-duplex operation)
400 Meters
50/125µm Multimode Fiber
(full-duplex operation)
2000 Meters
62.5/125µm Multimode Fiber
(half-duplex operation)
400 Meters
52.5/125µm Multimode Fiber
(full-duplex operation)
2000 Meters
100BASE-TX
Category 5 UTP Cable (100Mbps) 100 Meters
10BASE-T
Category 3 UTP Cable (10Mbps) 100 Meters
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 110 111

Comments to this Manuals

No comments