D-Link DES-7100 User Manual download pdf (Page 57)

DES-7000/DES-7100 Layer 2 Switch User’s Guide

Using the Web-based Management Software

Port Configuration

The statuses of the module ports are summarized in the Port Information Table. Use the configuration

menus at the top of the menu to configure ports individually or a selected range of ports. The example

Port Configuration menu pictured below shows the default port settings for the DES-7010 VDSL

module.

The options available for port configuration vary according to the type of module in the slot. This is the

main difference between the modules, in almost every other respect, ports on the different module

types can be thought of as standard ports on a Layer 2 Ethernet switch.

The differences between the module types as far as port configuration is concerned is summarized

below:

Type DES-7003 DES-7005 DES-7006 DES-7010

Speed

10 or 100 Mbps 100 Mbps only

Adjustable for

upstream and

downstream speed

customization

Duplex

Uplink ports for

Optical Gigabit

Ethernet operate at

1000 Mbps in full

duplex only.

Full or Half Full only N/A

Flow

Control

Enable or Disable

per port

Enable or Disable

per port

Enable or Disable

per port

N/A

Learning

Enabled on all ports.

Enable or Disable

per port

Enable or Disable

per port

Enable or Disable

per port

State

Enable or Disable

per port

Enable or Disable

per port

Enable or Disable

per port

Enable or Disable

per port

Unlike standard Ethernet ports, VDSL ports allow customization of upstream and downstream data

rates. See the table below for a description. The Rate Adaptive feature for VDSL ports is enabled (or

disabled) in a separate menu (see VDSL Port Rate Adaptive section on page 75)

Figure 6- 7. Port Configuration – DES-7010 VDSL Module

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 110 111

Comments to this Manuals

No comments

D-Link DES-7100 User Manual Page 57

Comments to this Manuals

Related products and manuals for Network switches D-Link DES-7100