D-Link DGS-3000-10TC Technical Information download pdf (Page 31)

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide

Parameter Description

System Severity Choose how the alerts are used from the drop-down menu. Select Log to send the alert of

the Severity Type configured to the Switch’s log for analysis. Choose Trap to send it to an

SNMP agent for analysis, or select All to send the chosen alert type to an SNMP agent and

the Switch’s log for analysis.

Severity Level

This drop-down menu allows you to select the level of messages that will be sent. The

options are Emergency (0), Alert (1), Critical (2), Error (3), Warning (4), Notice (5),

Information (6) and Debug (7).

Click the Apply button to accept the changes made.

Time Range Settings

Time range is a time period that the respective function will take an effect on, such as ACL. For example, the

administrator can configure the time-based ACL to allow users to surf the Internet on every Saturday and every

Sunday, meanwhile to deny users to surf the Internet on weekdays.

The user may enter up to 64 time range entries on the Switch.

To view the following window, click System Configuration > Time Range Settings, as show below:

Figure 2-23 Time Range Settings window

The fields that can be configured are described below:

Parameter Description

Range Name

Enter a name of no more than 32 alphanumeric characters that will be used to identify this

time range on the Switch. This range name will be used in the Access Profile table to

identify the access profile and associated rule to be enabled during this time range.

Hours (HH MM

SS)

This parameter is used to set the time in the day that this time range is to be enabled using

the following parameters:

Start Time - Use this parameter to identify the starting time of the time range, in hours,

minutes and seconds, based on the 24-hour time system.

End Time - Use this parameter to identify the ending time of the time range, in hours,

minutes and seconds, based on the 24-hour time system.

Weekdays

Use the check boxes to select the corresponding days of the week that this time range is to

be enabled. Tick the Select All Days check box to configure this time range for every day of

the week.

Click the Apply button to accept the changes made. Current configured entries will be displayed in the table in the

bottom half of the window shown above.

Time Settings

Users can configure the time settings for the Switch.

To view the following window, click System Configuration > Time Settings, as show below:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 333 334

No comments

D-Link DGS-3000-10TC Technical Information Page 31