D-Link DAP-1360 User Manual download pdf (Page 49)

49D-Link DAP-1360 User Manual

Section 3 - Conﬁguration

Static IP

Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet

mask, gateway address, and DNS address(es) provided to you by your ISP.

IP Address:

Subnet Mask:

Default Gateway:

MTU Size:

Primary DNS Server:

Secondary DNS Server:

Clone MAC Address:

192.168.1.1 is the default WAN IP Address

of the DAP-1360.

255.255.255.0 is the default subnet mask.

All devices on the network must have the

same subnet mask to communicate on

the network.

Enter the IP Address of the gateway in

your network.

You may need to change the MTU

(Maximum Transmission Unit) for optimal

performance with your specic ISP. The

default MTU size is 1500.

Enter the Primary DNS (Domain Name

System) server IP address assigned by

your ISP.

Enter the Secondary DNS (optional) server IP address assigned by your ISP.

The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC’s MAC

Address button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended

that you change the default MAC address unless required by your ISP.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 97 98

No comments

D-Link DAP-1360 User Manual Page 49