D-Link DAP-1360 User Manual download pdf (Page 57)

57D-Link DAP-1360 User Manual

Section 3 - Conﬁguration

Port Forwarding (WISP modes only)

Check the box to congure a port forwarding

rule.

Enter a name for the rule. You can select an

application name from the Application Name

drop-down menu. Click the << button to ll in

the Name eld with the application name that

you selected.

Enter the IP address of the computer on your

local network that you want to allow the incoming

service to.

Enter the port or ports that you want to open. If

you want to open one port, enter the same port

in both boxes.

Select TCP, UDP, or Both.

Port Forwarding

Rules:

Name:

IP Address:

Start/End Ports:

Trafﬁc Type:

This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows

you to open a single port or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port

Forwarding List.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 97 98

No comments

D-Link DAP-1360 User Manual Page 57