D-Link DHP-1565 User Manual download pdf (Page 33)

28D-Link DHP-1565 User Manual

Section 3 - Conguration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP

(Internet Service Provider).

Maximum Transmission Unit - you may need to change the

MTU for optimal performance with your specic ISP. 1500

is the default MTU.

The default MAC Address is set to the Internet port’s

physical interface MAC address on the Broadband Router.

It is not recommended that you change the default MAC

address unless required by your ISP. You can use the Clone

Your PC’s MAC Address button to replace the Internet port’s

MAC address with the MAC address of your Ethernet card.

IP Address:

Subnet Mask:

Default

Gateway:

DNS Servers:

MTU:

MAC Address:

Manual Internet Connection Setup

Static IP

Select Static IP from the drop-down menu if all the Internet port’s IP information is provided to you by your ISP. You will need

to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address

entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not

accept the IP address if it is not in this format.

Click the Save Settings button to save any changes made.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 170 171

No comments

D-Link DHP-1565 User Manual Page 33