D-Link DHP-1565 User Manual download pdf (Page 35)

30D-Link DHP-1565 User Manual

Section 3 - Conguration

Select Static IP if your ISP assigned you the IP address,

subnet mask, gateway, and DNS server addresses. In most

cases, select Dynamic.

Enter the IP address (Static PPPoE only).

Enter your PPPoE user name.

Enter your PPPoE password and then retype the password

in the next box.

Enter the ISP Service Name (optional).

Use the radio buttons to specify the reconnect mode.

The user can specify a custom schedule or specify the On

Demand, or Manual option.

Enter a maximum idle time during which the Internet

connection is maintained during inactivity. To disable this

feature, enable Auto-reconnect.

Enter the Primary and Secondary DNS Server Addresses

(Static PPPoE only).

Maximum Transmission Unit - you may need to change the

MTU for optimal performance with your specic ISP. 1492

is the default MTU.

Address Mode:

IP Address:

User Name:

Password:

Service Name:

Reconnect

Mode:

Maximum Idle

Time:

DNS Servers:

MTU:

Manual Internet Connection Setup

PPPoE (Username/Password)

Select PPPoE (Username/Password) from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide you

with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from

your computer. The software is no longer needed and will not work through a router.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 170 171

No comments

D-Link DHP-1565 User Manual Page 35