D-Link DHP-1565 User Manual download pdf (Page 34)

29D-Link DHP-1565 User Manual

Section 3 - Conguration

The Host Name is optional but may be required by some

ISPs. Leave blank if you are not sure.

Enter the Primary and Secondary DNS server IP addresses

assigned by your ISP. These addresses are usually obtained

automatically from your ISP. Enter the value 0.0.0.0 if you

did not specically receive these from your ISP.

Maximum Transmission Unit - you may need to change the

MTU for optimal performance with your specic ISP. 1500

is the default MTU.

The default MAC Address is set to the Internet port’s physical

interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address

unless required by your ISP. You can use the Clone Your

PC’s MAC Address button to replace the Internet port’s

MAC address with the MAC address of your Ethernet card.

Manual Internet Connection Setup

Dynamic IP (DHCP)

Select Dynamic IP (DHCP) from the drop-down menu to obtain IP Address information automatically from your ISP. Select

this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such

as Comcast and Cox.

Host Name:

Primary/

Secondary

DNS Server:

MTU:

MAC Address:

Click the Save Settings button to save any changes made.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 170 171

No comments

D-Link DHP-1565 User Manual Page 34