D-Link DIR-862L User Manual download pdf (Page 22)

22D-Link DIR-628 User Manual

Section 3 - Conﬁguration

Select Dynamic IP (DHCP) to obtain IP Address

information automatically from your ISP. Select

this option if your ISP does not give you any IP

numbers to use. This option is commonly used

for Cable modem services.

Check Enable Advanced DNS Service if you

wish to use this free security option.

The Host Name is optional but may be required

by some ISPs.

Check the box if you are having problems

obtaining an IP address from your ISP.

Enter the Primary DNS server IP address

assigned by your ISP.

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with

your speciﬁc ISP. 1500 is the default MTU.

The default MAC Address is set to the Internet

port’s physical interface MAC address on the

Broadband Router. It is not recommended that

you change the default MAC address unless

required by your ISP. You can use the Clone

Your PC’s MAC Address button to replace

the Internet port’s MAC address with the MAC

address of your Ethernet card.

My Internet

Connection:

Host Name:

MAC Address:

Manual Conﬁguration

Dynamic (Cable)

DNS Addresses:

MTU:

Use Unicasting:

Advanced

DNS Service:

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 111 112

Comments to this Manuals

No comments