D-Link DIR-862L User Manual download pdf (Page 54)

54D-Link DIR-628 User Manual

Section 3 - Conﬁguration

Set the transmit power of the antennas.

Beacons are packets sent by an Access Point

to synchronize a wireless network. Specify

a value. 100 is the default setting and is

recommended.

This value should remain at its default setting

of 2432. If inconsistent data ﬂow is a problem,

only a minor modiﬁcation should be made.

The fragmentation threshold, which is speciﬁed

in bytes, determines whether packets will be

fragmented. Packets exceeding the 2346 byte

setting will be fragmented before transmission.

2346 is the default setting.

(Delivery Traffic Indication Message) 3 is

the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast

messages.

Enabling WLAN Partition prevents associated wireles clients from communicating with each other.

WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless

clients.

Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may

create higher data loss.

Transmit Power:

Beacon Period:

RTS Threshold:

Fragmentation

Threshold:

DTIM Interval:

WLAN Partition:

WMM Function:

Short GI:

Advanced Wireless Settings

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 111 112

No comments

D-Link DIR-862L User Manual Page 54