D-Link DSA-3200 Technical Information download pdf (Page 112)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Internal cost represents a quicker transmission. Selecting 0 (zero) for this parameter will set

the quickest route automatically and optimally for an interface.

Priority Enter a value between 0 and 240 to set the priority for the port interface. A higher priority will

designate the interface to forward packets first. A lower number denotes a higher priority.

Click Find to see the information of the specific port. To modify the settings for a particular MSTI instance, click the Edit button

and then enter a value in the Internal Path Cost field and use the drop-down menu to select a value for Priority.

Link Aggregation

Port Trunking

Understanding Port Trunk Groups

Port trunk groups are used to combine a number of ports together to make a single high-band-width data pipeline. Another

advantage of implementing port trunk groups is redundancy, as if one of the ports or links fails in the port trunk group, the

network connection to the remote Switch will be maintained. The table below shows the maximum amount of groups supported

for each trunk group and the potential bit rate for the DGS-3200-10, DGS-3200-16, and DGS-3200-24 Switches.

Model Maximum Number of

Groups

Maximum Number of

Ports

Potential Bit Rate

DGS-3200-10

5 8 8000 Mbps

DGS-3200-16

8 8 8000 Mbps

DGS-3200-24

12 8 8000 Mbps

Figure 3 - 67. Port Trunk Group Table for DGS-3200-10/DGS-3200-16/DGS-3200-24

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 320 321

No comments

D-Link DSA-3200 Technical Information Page 112